Now in Stock: Raspberry Pi 3 Model B in India
Now buy #RaspberryPi3 Model B in India on DIY-India.com
The latest Signle board computer from Raspberry Pi. Built on the latest Broadcom 2837 ARMv8 64bit processor, the new generation Raspberry Pi 3 Model B is faster and more powerful than its predecessors. With built-in wireless and Bluetooth connectivity, it becomes the ideal IoT ready solution.
Buy Now on diy-india.com/shop/
#NEW Arival: 625 2RS Bearing now available in DIY-India.com
#NEW Arival: 625 2RS Bearing now available in DIY-India.com
625 2RS is also popularly know as Skate Bearing, This is a popular bearing for roller skates, roller blades, skate boards, robotics, 3d printers, automation projects and scooters.
This bearing comes in shielded version, where RS stands for sealed bearing.
This bearing can used as replacement for following part numbers on it: 625-2RS, 625 2RS, 625 RS, 625RS, 625-ZZ, 625 ZZ, 625 Z, 625Z
Buy it from DIY-INDIA.COM
NEW Arrival: Solid V Wheel now available in DIY-India.com
#NEW Arrival: Solid V Wheel now available in DIY-India.com
The Solid V Wheel is a strong wheel that resists deflection due to its solid nature.
Solid V Wheel is suitable for builds where heavier loads are required and less compression in the delrin is desired. Many of these wheels could be added to a gantry to allow an even distribution of the load across them.
Solid V Wheel has improved performance of the belt and pinion system to give the belt a flat surface to ride on. these wheels are manufactured to have precision and tolerance.
Buy it from DIY-INDIA.COM
NEW Arival: Nyloc Nut, now available in DIY-India.com
#NEW Arival: Nyloc Nut, now available in DIY-India.com
Nyloc Nut, also referred to as a nylon insert lock nut, polymer insert lock nut, or elastic stop nut. This elastic insert resists turning.
The plastic insert is placed at the end of the nut and its inner diameter (ID) is slightly smaller than the major diameter of the screw. The insert deforms elastically over the threads of the screw, but threads are not cut into the nylon. The nylon insert locks the nut by applying a compressive force against the screw.
Available Sizes: M3, M4, M5, M6, M8, M10
Buy Now from DIY-INDIA.COM
New Products: M8 and M10 threaded rods 1 meter length
New Arrival: Raspberry Pi NoIR Camera Board
#NewArrival on DIY-India.com #RaspberryPi #NoIR #Camera Board
Raspberry Pi NoIR Camera Module is add-on for Raspberry Pi that does not have an IR filter installed. Like the regular Pi camera, it attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data.
Continue reading →
New Arival: MK7 and MK8 Gears
#NewArival: #MK7 and #MK8 #Gears
Now buy the highest quality MK7 and MK8 Drive gear for extruders in India from DIY-India.com, MK style gear is used in direct derive extruders of 3D Printers and RepRaps.
Made by precise machining of stainless steel and Brass. The drive gear includes a M3 set screw and is suitable for typical NEMA17 motor shaft (5mm), Compatible with 1.75 mm and 3mm filaments
MK7 is available in Brass and SS Material, where as MK8 is available in SS Material.
Buy Now: https://www.diy-india.com/shop/3d-printing/mk7-and-mk8-gear-82/
New arrival Min Fan’s
#NewArrival #Min #Fan
Ultra quiet medium speed brushless DC fan, quiet sleeve-bearing design. This mini fan is used for cooling of printed material and active cooling of RepRap and 3D Printer hotend, extruder, Raspberry Pi, and electronics single board computers.
Buy it in India on : https://www.diy-india.com/shop/motors-32
