#HowTo build a yourself a #3DPrinted Tablet using #RaspberryPi
Adafruit has shared a project on how to build yourself a 3Dprinted tabled. this project showcases the scalibility of a 3D printed project for the Raspberry Pi.
This are the parts we used in this project, but it can be customized. e.g If you’d like to only have the Raspbery Pi and display. You will need some hardware to mount the components and secure the enclosure.
- Raspberry Pi 2
- 2x PowerBoost 1000C
- 2x 6000mAh Lithium Ion Battery
- PAM8302 Audio Amplifier
- Pigtail 3.5mm Stereo Audio Cable
- HDMI Cable
- Slide switch
- JST-PH extension cable
- Thin plastic speaker
Checkout the Complete Build Instruction.